New shop is running!
January 9th, 2017 posted under News.The new shop is ready for the new year!
Check the Contact Page for a map to the new location.
See some Before Pictures of the building.
We are moving!
September 19th, 2016 posted under News.As some of you might know, I am in the process of moving to a new location. We have acquired a 1000 ft^2 shop that in previous lives was a welding shop, chrome plating shop and a pinball machine repair shop. The building has been neglected for a number of years and is requiring a lot of work, and I appreciate your patience while I prepare this new space.
Below are some before pictures, follow us on facebook to see progress photos.
Biasing Hiwatt 200
September 17th, 2015 posted under Amps.This massive Hiwatt 200 came in for a new matched set of JJ KT88’s and a rebiasing.
Hiwatt 200
Frustrating Egnater Head
September 2nd, 2015 posted under Amps.I don’t usually “diss” amps, but repairing amps is a great way to see what amps are built well and what amps aren’t.
This Egnater head came in because it wasn’t powering on. An inrush current limiter had burned and blown up inside, yet the fuse next to it was perfectly fine! Despite the fact that the schematic was in chinese, I was abole to find the problem which ended up being a shorted Output Transformer (something that rarely happens with most other amps). Egnater’s service department was unresponsive by email, and when I did get them on the phone, their excuse was that their inbox gets flooded by spam. They did not think the Output Transformer was the problem, and instead wanted to send a replacement Power Transformer. In fairness to them, they did ship the output transformer under warranty in a timely manner (although they forgot the inrush current limiter I also asked for).
Traynor YGL-31 new caps
August 24th, 2015 posted under Amps.Traynor Amps​ vintage YGL-3A head in for new capacitors and a tune up. Gotta love how the top opens up on these amps!
Bent Mesa-Boogie
August 24th, 2015 posted under Amps.This Mesa-Boogie came in with a bent chassis and a bunch of broken components. All components were replaced and the chassis was straightened out like new!